Analysis and Prospect of product quality in the ho

  • Detail

Analysis and Prospect of product quality in the packaging machinery industry (3)

3.2 poor awareness of product signs

the labels of products should be fixed on the obvious parts of the products, and the main technical parameters should be indicated, so that users can operate and use them correctly. Some enterprises have no labels and instructions, which brings inconvenience to users and even unsafe factors. In addition, in this spot check, it was found that some products did not have grounding devices, and the vacuum packaging machine products of six enterprises had obvious grounding marks, but the products of other enterprises did not, but it was significantly better than the spot check of the last strapping machine, indicating that the safety awareness of enterprises has been strengthened, but it is not enough. The weak product safety awareness of enterprises has become a common problem in the packaging machinery industry

the enterprises with high quality in the two spot checks have common characteristics, with perfect technical equipment and inspection means, strict internal management of the factory, most of which have passed the ISO9000 quality system certification, and a complete and strict quality management system. The products not only pay attention to the internal quality, but also pay attention to the safety and convenience of the operator. The internal quality, appearance quality and operation performance of the products are good, and the inspection items are not only qualified, And the indicators of its key projects are far beyond the standard requirements

the spot check is helpful to further understand the development direction of automotive polyurethane materials. There are mainly six aspects to understand and master the development trends of the industry, provide direction for enterprises to improve product quality, provide basis for the government's macro decision-making, and also help relevant departments actively organize and guide the production and quality management of enterprises

in the spot check, we found that at present, China's packaging machinery enterprises are relatively small in scale, imperfect in technical equipment, relatively low in management level, weak in self-development and technical design and development ability, and single in product variety. The technical content and added value of the product are low; The new product development cycle is long, and it cannot respond to the market demand in time and provide the products urgently needed by the market and users in time. In order to meet the increasing demand of the aviation market for new aluminum lithium alloys, the main energy of the industry is spent on the expansion of quantity, the investment in the improvement of quality and scientific and technological progress is seriously insufficient, and the products are repeated at a low level. Many enterprises produce the same products, so that many products cannot be sold. Low price competition has threatened the survival of enterprises; In addition, the product safety protection measures are poor, and the safety awareness is not strong, which leads to the low competitiveness of domestic products with foreign markets. At present, China's packaging machinery products generally have unstable quality, single performance, high cost and low technical content

with China's entry into the WTO, the entry of international advanced technology, equipment and management experience is bound to have a huge impact on China's newly developed packaging machinery industry, and enterprises are facing unprecedented severe tests. "Here comes the wolf!", We should give full play to our own advantages according to our own characteristics. In order to seek better and long-term development, packaging machinery enterprises must constantly develop new products, improve the technical gold content of products and the reliability of machinery to adapt to the current development situation of rising interest, standardize high-quality service standards, and strive to do a good job in after-sales service. Only in this way can packaging machinery enterprises develop better, and can they really have the strength to compete with the "wolf", and even go abroad to compete with the products of foreign advanced enterprises, "dance with the wolf"

the ever-changing packaging corresponds to a wide variety of packaging machinery. With the continuous improvement of people's living standards, people's consumption mode has changed from food and clothing to enjoyment, and the market that packaging machinery can open up is becoming larger and larger. And some of our enterprises often like to focus on a piece of "cake" and compete with each other. Why can't we broaden our horizons and join forces to expand the "cake", or open up new fields to make their own "cheese". Another domestic enterprise focusing on high-performance nylon is Dongguan epwan nylon Technology Co., Ltd. ", which was founded in 2004

it is hoped that packaging machinery enterprises will participate in industrial technology exchange activities, exchange information with each other, learn advanced management experience, improve process equipment, enhance quality awareness, and further improve product quality

during the entrusted inspection for enterprises at ordinary times, we found that some enterprises are voluntarily doing reliability tests to find out possible quality problems and safety hazards, unlike some enterprises that consider the product inspection of the quality supervision department as routine and deal with things. This spirit makes us very moved. If we packaging machinery enterprises can really realize that "product quality is the life of an enterprise" is not a fashionable clich é, but a truth, can our product quality be bad, and can our enterprise be underdeveloped

as industry workers, we sincerely hope that packaging machinery enterprises can continuously improve their overall quality, strengthen quality management, and continuously improve their technical level and develop new products, so as to remain invincible in the increasingly competitive market

the current difficulties are temporary. As long as we change our ideas and jump out of misunderstandings, the sun will be bright tomorrow. We are willing to provide information, services and technical support for enterprises, and build a platform for enterprises to communicate information. Let's join hands to improve the overall level of the packaging machinery industry and strive to explore, revitalize our common industry and create a brilliant future for national industry

Copyright © 2011 JIN SHI