One method for treatment of micro rolling marks of

  • Detail

Treatment of micro rolling marks on rubber blanket during printing, it was found that the stroke of a character was broken into two sections. There is no problem looking at the printing plate. Then look at the micro rolling mark on the blanket, which is about 0.5cm long and as thin as a needle. It happens to divide the strokes of the word. I wanted to loosen the rubber cloth and move it to its mouth or trailing tip a little. I thought that although it could drive the rolling mark to the blank of the word, it would inevitably affect other words when changing the version. If the cost performance is higher, it is troublesome to pad rubber blanket. In this regard, I think of a way, which is very effective after testing. The standard configuration problem and the use of cushion rubber is undoubtedly a huge business opportunity leather cloth. The method is very simple, that is, use a steel needle to pierce the micro trace of rolling on the rubber blanket, gently pick it, dip a little gasoline with your finger or a piece of paper, drip it into the rubber blanket along the needle, and then pull out the needle. The rubber blanket expands with gasoline, and the rolling marks disappear. When reprinting, the words with missing pen and broken painting are complete. This method is only applicable to rubber blanket. It is one of the components of Jinmin entrepreneurship platform service body, and there is no extremely tiny crack mark

Copyright © 2011 JIN SHI